This type of message is generated during the model run. Setup processing has been completed successfully, and the message is generated during the performance of model calculations.  Typical messages will tell the information and  error during the model run.  If a fatal error of this kind is detected during model execution, a fatal error message is written to the message file and any further processing of the data is prohibited.  The rest of the meteorological data file will be read and quality assurance checked to identify additional errors.  If a warning occurs, data may or may not be processed, depending on the processing requirements specified within the run stream input data.

 

400  No Convergence Reached in SUB. CUBIC.  The CUBIC module is used to solve a cubic equation for the Schulman‑Scire BLP plume rise and for the vertical virtual distance for URBAN mode.  The routine uses Newton's method, which is an iterative approach to determining the solution to the cubic equation.  This message is generated if the routine does not converge within 24 iterations.  The message is provided for informational purposes and processing will continue.  The date of occurrence is provided with the message.

 

410  Flow Vector Out‑of‑Range.  The flow vector must be between 0 and 360 degrees, inclusive.  The date of occurrence is provided with the message (in the form of year, month, day, hour as YYMMDDHH)

 

420  Wind Speed Out‑of‑Range.  The wind speed value may be either too large or too small.  An error is generated if the speed is less than 0.0, and a warning is generated if the speed is greater than 30.0 m/s.  The date of occurrence is provided with the message (in the form of year, month, day, hour as YYMMDDHH).

 

430  Ambient Temperature Data Out‑of‑Range.  The ambient temperature value may be either too large or too small. A warning is generated if the temperature is less than 250.0 K or greater than 320 K.  The date of occurrence is provided with the message (in the form of year, month, day, hour as YYMMDDHH).

 

435  Surface Roughness Length Out‑of‑Range.  The surface roughness value may be too small or missing.  A warning is generated if the surface roughness length is less than 1.0E-05 meters.  The value is set to 1.0E-05 to avoid possible division by zero.  The date of occurrence is provided with the message (in the form of year, month, day, hour as YYMMDDHH).

 

 

301 - 302 - 303 - 304 - 305 - 306 - 307 - 308 - 309 - 310 - 311 - 312 - 313 - 314 - 315 - 316 - 317 - 318 - 319 - 320 - 321 - 322 - 323 - 324 - 325 - 326 - 327 - 328 - 329 - 330 - 331 - 332 - 333 - 334 - 335 - 336 - 337 - 338 - 339 - 340 - 341 - 342 - 343 - 344 - 345 - 346 - 347 - 348 - 349 - 350

 

    Flag of Portugal 

 english:

 castellano: DISPER CUSTIC DESCAR RADIA    italiano:     

 

 français:    português:  

 

deutsch:

 

 

 

deutsch: DIS CUS  DES  RAD

castellano: DIS CUS DES  RAD   english: DIS CUS DES RAD  

 

 português: DIS CUS DES RAD   italiano:   DIS CUS  DES RAD

 

français:  DIS CUS DES RAD