366 Possible Averaging Time Conflict: PERIOD Average Only. The CO AVERTIME card has specified the PERIOD average only. There could be a conflict unless the ME STARDATA card is used to specify the STAR summaries in the data file.
368 Averaging Time Conflict: PERIOD Average with No STARDATA. The ISCLT model cannot process the PERIOD average unless the STAR summaries in the data file are identified, either through the CO AVERTIME card or the ME STARDATA card.
369 Averaging Time Conflict: Both SEASON and QUARTR. The ISCLT model cannot process both seasonal and quarterly STAR summaries in the same model run, since they occupy the same areas in the data storage.
370 Invalid Date: 2/29 In a Non‑leap Year. The year has been identified as a leap year, and a date of 2/29 (February 29) has been specified on the DAYRANGE card. Check the year and/or the date specification.
380 This Input Variable is Out‑of‑Range. The indicated value may be too large or too small. Use the line number to locate the card in question, and check the variable for a possible error.
385 Averaging period does not equal 1-hour averages for the TOXXFILE option for the ISCST model. The ISCST model will generate TOXXFILE outputs for other averaging periods, but the TOXX model component of TOXST currently supports only the 1-hour averages. This is a non-fatal warning message.
390 Invalid Averaging Period Specified for the Event. An invalid averaging period has been specified for the event name indicated for the ISCEV model. This may be an averaging period that was not selected on the CO AVERTIME card, or it may be an averaging period of greater than 24 hours, which cannot be handled by ISCEV.
391 Aspect ratio (length/width) of an area source is greater than 10. The new area source algorithm in the ISC3 model allows for specifying area sources as elongated rectangles, however, if the aspect ratio exceeds 10 a warning message will be printed out. The user should subdivide the area so that each subarea has an aspect ratio of less than 10.
392 Aspect ratio (length/width) of an open pit source is greater than 10. The new open pit algorithm in the ISC3 model allows for specifying open pit sources as elongated rectangles, however, if the aspect ratio exceeds 10 a warning message will be printed out. Due to the way open pit sources are treated by the model, an open pit source should not be subdivided. The user should therefore use extra caution when interpreting results of the open pit algorithm for sources that exceed an aspect ration of 10.
301 - 302 - 303 - 304 - 305 - 306 - 307 - 308 - 309 - 310 - 311 - 312 - 313 - 314 - 315 - 316 - 317 - 318 - 319 - 320 - 321 - 322 - 323 - 324 - 325 - 326 - 327 - 328 - 329 - 330 - 331 - 332 - 333 - 334 - 335 - 336 - 337 - 338 - 339 - 340 - 341 - 342 - 343 - 344 - 345 - 346 - 347 - 348 - 349 - 350
castellano: DISPER CUSTIC DESCAR RADIA italiano:
deutsch: DIS CUS DES RAD
castellano: DIS CUS DES RAD english: DIS CUS DES RAD
português: DIS CUS DES RAD italiano: DIS CUS DES RAD
français: DIS CUS DES RAD