235  Number of Source Groups Specified Exceeds Maximum.  The user has specified more source groups than the model array limits allow.  This array limit is controlled by the NGRP PARAMETER specified in the MAIN1.INC file.  The value of NGRP is provided with the message.

 

236  Not Enough BUILDHGTs Specified for a Source ID.  There should be 36 building heights for Short Term and 16 for Long Term.

 

237  Not Enough BUILDWIDs Specified for a Source ID.  There should be 36 building widths for Short Term and 16 for Long Term.

 

238  Not Enough LOWBOUNDs Specified for a Source ID.  There should be 36 lower bound flags specified for Short Term and 16 for Long Term.

 

239  Not Enough QFACTs Specified for a Source ID.  The number of variable emission rate factors specified for a particular source is less than the model expects based on the variable emission rate flag.  Check the EMISFACT keyword on the SO pathway in Appendix B of Section 3 for the appropriate number.

 

240  Inconsistent Number of Particle Size Categories for a particular source.  The number of parameters must be the same for the PARTDIAM, MASSFRAX and PARTDENS keywords for a particular source.

 

242  No Particle Size Categories Specified for Source ID. There were no settling/removal categories specified for the indicated source.  When modeling for total deposition, the user must include the PARTDIAM, MASSFRAX and PARTDENS keywords for each source.

 

243  No Scavenging Coefficients Specified for Source ID. There were no scavenging coefficients specified for the indicated source.  When modeling for total deposition, wet deposition, or wet depletion, the user must include the PARTSLIQ and PARTSICE keywords for particulate sources or the GAS-SCAV keyword for gaseous sources.

 

244  Too Many Settling and Removal Parameters specified for a particular source.  The limit is controlled by the NPDMAX PARAMETER in the computer code, set initially to 20.

 

245  Number of Particle Size Categories Exceeds Maximum. The user has specified more settling/removal categories than the model array limits allow.  This array limit is controlled by the NPDMAX PARAMETER specified in the MAIN1.INC file.  The value of NPDMAX is provided with the message.

 

 

301 - 302 - 303 - 304 - 305 - 306 - 307 - 308 - 309 - 310 - 311 - 312 - 313 - 314 - 315 - 316 - 317 - 318 - 319 - 320 - 321 - 322 - 323 - 324 - 325 - 326 - 327 - 328 - 329 - 330 - 331 - 332 - 333 - 334 - 335 - 336 - 337 - 338 - 339 - 340 - 341 - 342 - 343 - 344 - 345 - 346 - 347 - 348 - 349 - 350

 

 

    Flag of Portugal 

 english:

 castellano: DISPER CUSTIC DESCAR RADIA    italiano:     

 

 français:    português:  

 

deutsch:

 

 

 

deutsch: DIS CUS  DES  RAD

castellano: DIS CUS DES  RAD   english: DIS CUS DES RAD  

 

 português: DIS CUS DES RAD   italiano:   DIS CUS  DES RAD

 

français:  DIS CUS DES RAD