Once the source files have been compiled successfully, and object (.OBJ) files have been generated for each source file, the model is ready to be linked and an executable file created. The executable file on the SCRAM BBS was linked using a memory overlay manager so that only certain portions of the code are resident in memory at any given time.  This allows for a more efficient use of available memory by the model, and therefore allows for larger runs to be performed than would be possible without using overlays.  This is accomplished with the following command line for the linker provided with the Microsoft compiler, which is included in the link response file, FLMSISCS.LRF:

/E /SE:256 ISCST3+PCCODE+SETUP+(COSET)+(SOSET)+(RESET)+(MESET)+(TGSET)+(OUSET)+(INPSUM)+(METEXT+

   CALC1+CALC2+CALC3+PRISE+SIGMAS+CALC4+DEPFLUX+PITAREA)+(OUTPUT)

The /E option instructs the linker to produce a packed executable file that occupies less disk space.  The /SE:256 option increases the number of segments allowed to 256.  With this memory overlay structure, the ISCST3, PCCODE and SETUP modules are always memory resident, and any module or group of modules within parentheses are overlayed into the same area of memory only when needed.  Linking without the overlay manager will increase the minimum load size for the executable file by about 200K for the ISCST model

     Similar batch files are available for compiling and linking the ISCLT and ISCEV models.  The batch file for the ISCLT model, FLMSISCL.BAT, includes the following commands:

FL /c /FPi /AH ISCLT3.FOR

FL /c /FPi /AH /DMICRO PCCODELT.FOR

FL /c /FPi /AH SETUPLT.FOR

FL /c /FPi /AH COSETLT.FOR

FL /c /FPi /AH SOSETLT.FOR

FL /c /FPi /AH RESETLT.FOR

FL /c /FPi /AH MESETLT.FOR

FL /c /FPi /AH TGSETLT.FOR

FL /c /FPi /AH OUSETLT.FOR

FL /c /FPi /AH INPSUMLT.FOR

FL /c /FPi /AH METEXTLT.FOR

FL /c /FPi /AH CALC1LT.FOR

FL /c /FPi /AH CALC2LT.FOR

FL /c /FPi /AH CALC3LT.FOR

FL /c /FPi /AH PRISELT.FOR

FL /c /FPi /AH SIGMASLT.FOR

FL /c /FPi /AH PITAREAL.FOR

FL /c /FPi /AH DEPFLUX.FOR

FL /c /FPi /AH OUTPUTLT.FOR

LINK @FLMSISCL.LRF

The only difference between this and the file for the ISCST model is the source file names.  This file invokes the following command line from the FLMSISCL.LRF link response file:

/E /SE:256 ISCLT3+PCCODELT+SETUPLT+(COSETLT)+(SOSETLT)+(RESETLT)+(MESETLT)+(TGSETLT)+(OUSETLT)+

   (INPSUMLT)+(METEXTLT+CALC1LT+CALC2LT+CALC3LT+PRISELT+SIGMASLT+PITAREAL+DEPFLUX)+(OUTPUTLT)

The batch file for the ISCEV model, FLMSISCE.BAT, includes the following commands:

FL /c /FPi /AH EVISCST3.FOR

FL /c /FPi /AH /DMICRO EVPCCODE.FOR

FL /c /FPi /AH EVSETUP.FOR

FL /c /FPi /AH EVCOSET.FOR

FL /c /FPi /AH EVSOSET.FOR

FL /c /FPi /AH EVMESET.FOR

FL /c /FPi /AH EVTGSET.FOR

FL /c /FPi /AH EVEVSET.FOR

FL /c /FPi /AH EVOUSET.FOR

FL /c /FPi /AH EVINPSUM.FOR

FL /c /FPi /AH EVMETEXT.FOR

FL /c /FPi /AH EVCALC1.FOR

FL /c /FPi /AH EVCALC2.FOR

FL /c /FPi /AH EVPRISE.FOR

FL /c /FPi /AH EVSIGMAS.FOR

FL /c /FPi /AH EVPITARE.FOR

FL /c /FPi /AH DEPFLUX.FOR

FL /c /FPi /AH EVOUTPUT.FOR

LINK @FLMSISCE.LRF

which invokes the following command from the ISCEV.LRF link response file:

/E /SE:256 EVISCST3+EVPCCODE+EVSETUP+(EVCOSET)+(EVSOSET)+(EVMESET)+(EVTGSET)+(EVEVSET)+(EVOUSET)+

   (EVINPSUM)+(EVMETEXT+EVCALC1+EVCALC2+EVPRISE+EVSIGMAS)+(EVOUTPUT)

 

 

251 - 252 - 253 - 254 - 255 - 256 - 257 - 258 - 259 - 260 - 261 - 262 - 263 - 264 - 265 - 266 - 267 - 268 - 269 - 270 - 271 - 272 - 273 - 274 - 275 - 276 - 277 - 278 - 279 - 280 - 281 - 282 - 283 - 284 - 285 - 286 - 287 - 288 - 289 - 290 - 291 - 292 - 293 - 294 - 295 - 296 - 297 - 298 - 299 - 300

 

      Flag of Portugal 

 english:

 castellano:     italiano:     

 

 français:    português:  

 

deutsch:

 

 

 

deutsch: DIS CUS  DES  RAD

castellano: DIS CUS DES  RAD   english: DIS CUS DES RAD  

 

 português: DIS CUS DES RAD   italiano:   DIS CUS  DES RAD

 

français:  DIS CUS DES RAD