english:

 

 

                                 

 

     The following examples illustrate the use of the MAXIFILE option:

OU MAXIFILE  24  ALL   364.0  MAX24ALL.OUT

OU MAXIFILE  24  PSD    91.0  MAXPSD.OUT    50

OU MAXIFILE   3  PSD   365.0  MAXPSD.OUT    50

OU MAXIFILE   3  PLANT  25.0  C:\OUTPUT\MAXI3HR.FIL

OU MAXIFILE MONTH  ALL  10.0  MAXMONTH.OUT

56

 

where the 3‑hour example illustrates the use of a DOS pathname for the PC, and the last example illustrates the use of monthly averages.  The FILNAM parameter may be up to 40 characters in length.  It should also be noted that only one MAXIFILE card may be used for each averaging period/source group combination. Note:  The MAXIFILE option may produce very large files for  runs involving a large number of receptors if a significant percentage of the results exceed the threshold value.

     The syntax and type for the POSTFILE keyword are summarized below:

Syntax:

OU POSTFILE  Aveper  Grpid  Format  Filnam (Funit)

Type:

Optional, Repeatable

where the Aveper parameter is the averaging period (e.g. 3, 8, 24 for 3, 8 and 24‑hour averages, MONTH for monthly averages, PERIOD for period averages, or ANNUAL for annual averages) and Grpid is the source group ID for which the POSTFILE option is selected.  The Format parameter specifies the format of the POSTFILE output, and may either be the secondary keyword UNFORM for unformatted concentration files, or the secondary keyword PLOT to obtain formatted files of receptor locations (x‑ and y‑coordinates) and concentrations suitable for plotting contours of concurrent values.  The Filnam parameter is the name of the file where the POSTFILE results are to be written.  The optional Funit parameter allows the user the option of specifying the Fortran logical file unit for the output file.  The user‑specified file unit must be in the range of 20‑100, inclusive.  By specifying the same filename and unit for more than one POSTFILE card, results for different source groups and/or averaging periods may be combined into a single file.  If the Funit parameter is omitted, then the model will dynamically allocate a unique file unit for this file (see Section 3.9.2).

 

201 - 202 - 203 - 204 - 205 - 206 - 207 - 208 - 209 - 210 - 211 - 212 - 213 - 214 - 215 - 216 - 217 - 218 - 219 - 220 - 221 - 222 - 223 - 224 - 225 - 226 - 227 - 228 - 229 - 230 - 231 - 232 - 233 - 234 - 235 - 236 - 237 - 238 - 239 - 240 - 241 - 242 - 243 - 244 - 245 - 246 - 247 - 248 - 249 - 250

 

      Flag of Portugal 

 castellano:     italiano:     

 

 français:    português:  

 

deutsch:

 

castellano: DIS CUS DES  RAD   english: DIS CUS DES RAD  

 

 português: DIS CUS DES RAD   italiano:   DIS CUS  DES RAD

 

français:  DIS CUS DES RAD