CANARINA:
DESCAR:
Modifying data as time progresses:
Some discharge data can vary with time (velocity of the current, pollutant concentration,...). Taking this into account, the program can do temporal averages in the calculation. In the DESCAR software, these data are allowed to vary with time.
Variables that can be modified as time progresses:
Current velocity (m/s)
Current angle (degrees)
Effluent velocity (m/s)
Pollutant concentration (g/m^3)
Discharge flow rate (m^3/s)
Variables that can not be modified as time progresses:
Buoyant Jet model / Stratified model
Water density (kg/m^3)
Stratification coefficient (1/s^2)
Water is stratified / Water is not stratified
Water depth at discharge location (m)
Discharge density (kg/m^3)
Pipe angle (degrees)
Diffuser length (m)
1/T90 (1/hours)
Discharge conditions
Number of openings
Canarina Algoritmos Numéricos, S.L.
Environmental software · environmental software solutions
Canary Islands, Spain
e-mail: Contact us
European Union · network on Pollution
Member of MAPO: European network on Marine Pollution.
Project funded by the European Commission
through the 6th Framework Programme for Research and Development
DESCAR - Solutions - Advantages - Price - Data I - Data II - Average - Import - Graphs I - Graphs II - Commands - Algorithms I - Algorithms II - Algorithms III - Algorithms IV - Algorithms V - Algorithms VI - Algorithms VII - Pollutants I - Pollutants II - The sea I - The sea II - Pycnocline - Google maps - GIS
Copyright © 2005 Canarina Algoritmos Numéricos, Sociedad Limitada Unipersonal CIF-B38803110 registered for electronic commerce in sheet TF-35526, sheet 1 of the volume 2.671 of the General Section, First Registration, Registro de la Propiedad Número 2 y Marcantil of , Spain. All rights reserved.
